click image to preview
activate zoom
Fujikura 80S
| Stok | Tersedia |
| Kategori | Fusion Splicer, Telecomunication |
Fujikura 80S
The Fusion Splicer Fujikura 80S is equipped with a precision, fixed v-groove for splicing single fibers or ribbon fiber up to 12 fibers. Incorporating the proven ruggedized features pioneered by Fujikura, the Fusion Splicer Fujikura 80S has added automated and enhanced user control features to increase splicing efficiency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion. A new auto-start “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 40-second shrink time for 12-fiber ribbon. The result is a total splice process time of approximately 55 seconds! Ruggedness and durability are greatly enhanced by a mirror-less optical system and “severe-impact resistant” monitor. Battery capacity is now 110 splices/shrinks. An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before. Automatic and fully programmable wind protector 40-second tube heater High capacity Lithium-Ion battery pack (110 splices/shrinks) On-board training and support videos Multi-function transit case with integrated workstation
Features Fusion Splicer Fujikura 80S :
1.Color LCD monitor & 256 magnification
2.Compact & Light weight
3.Reversible monitor with control panel on each side
4.Max. wind velocity of 15m/s.
5.8 Sec. splice time, 40 Sec. tube-heat time
6.Simultaneous X and Y views
7.Large capacity internal battery
8.SYSTEM TEST ensures the best working condition
9.User programmable
10.Auto check fiber end face
11.Auto calibrate parameters
12.Auto calibrate parameters
13.Multiple language options
| PARAMETER | VALUE |
| Model | FSM-80C Fusion Splicer |
| Applicable Fibers | Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655) |
| Fiber Count | Single, 2, 4, 5, 6, 8, 10, 12 |
| Cladding Diameter | 125 μm |
| Coating Diameter | Ribbon: 0.25 mm to 0.4 mm, Single: 250 μm and 900 μm |
| Fiber Cleave Length | 10 mm |
| Typical Average Splice Loss | 0.05 dB with SM, 0.02 dB with MM, 0.08 dB with DS, 0.08 dB with NZDS;measured by cut-back method relevant to ITU-T standards |
| Splicing Time | Typical 15 seconds with standard single-mode fiber |
| Arc Calibration Method | Automatic, real-time by using results of previous splice when in AUTO mode; manual arc calibration function available |
| Splicing Modes | 100 preset and user programmable modes |
| Splice Loss Estimate | Based upon dual camera cladding alignment data |
| Storage of Splice Result | Last 2000 splice results stored in the internal memory |
| Fiber Display | X or Y, or both X and Y simultaneously; front or rear monitor display options with automatic image orientation |
| Magnification | 35X to 90X |
| Viewing Method | Dual cameras with 4.7 inch TFT color LCD monitor with anti-reflective coating |
| Operating Condition | 0 to 3,660 m above sea level, 0 to 95% RH, and -10 to 50°C respectively |
| Mechanical Proof Test | 1.96 to 2.25 N |
| Tube Heater | Built-in tube heater with 30 heating modes; auto-start function |
| Tube Heating Time | Typical 40 seconds with FP-5 sleeve, 17 seconds with FP3 (40), 5-15 seconds with Fujikura micro sleeves |
| Protection Sleeve Length | 60 mm, 40 mm, Micro |
| Splice/Heat Cycles with Battery | Typical 110 cycles with power save functions activated |
| Electrode Life | 1,500 Arc Discharges |
| Power Supply | Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-18, 14.8V DC with BTR-09 battery |
| Terminals | USB 2.0 (USB-B type) for PC communication and Mini-DIN (6-pin) for HJS-02/03 |
| Wind Protection | Maximum wind velocity of 15m/s (34 mph) |
| Dimensions | 146 W x 159 D x 150 H (mm) / 5.7 W x 6.3 D x 5.9 H (inches) |
| Weight | 2.3 kg (5.1 lbs) with AC adapter; 2.5 kg (5.5 lbs) with battery |
Fujikura 80S
| Berat | 250 gram |
| Kondisi | Baru |
| Dilihat | 305 kali |
| Diskusi | Belum ada komentar |
Produk Terkait
The AQ1200 Multi Field Tester OTDR is a compact and lightweight handheld OTDR optimized for the installation and maintenance of optical fiber cables. Designed with ease of use in mind to simplify field testing, improve work efficiency and ensure qualify results. Seven models are offered, each with unique wavelength(s) based on their specific application. Request… selengkapnya
*Harga Hubungi CS
7%
Fusion Splicer Comway A3 Splicing Mini Performance Pas aligment system Fiber Endface Melter And Fusion Splicer 2 in 1 4.1 inch Touch Screen -Smart ARC Control Technology Debit ARC kalibrasi otomatis, Lingkungan yang berbeda, kerugian stabil yang sama. -Kinerja tinggi pemanas Waktu pemanasan 15s, Hemat daya lebih cepat dan lebih banyak. -Layar cahaya tinggi Jelas… selengkapnya
Rp 21.000.000 Rp 22.500.000
Suplier Alat Telekomunikasi Beragam tipe yang memudahkan pekerjaan anda/perusahaan dengan harga yang sangat terjangkau dan kompetitif. Rohde & Schwarz FSH8 Handheld Spectrum Analyzer 9 kHz to 8 GHz with Preamplifier The new R& S FSH8 builds upon successes of FSH3/ 6/ 18 with network operators, TV broadcast operators, and military to offer an indispensable tool… selengkapnya
*Harga Hubungi CS
Fusion Splicer INNO IFS-55 Fitur: Otomatis dan programmable pelindung angin 6 detikSplicing;14-keduaTabung otomatis pemanas Sepenuhnya ruggedized untuk shock, debu dan kelembaban, Baterai Li-Ion dengan230 splices/menyusut per charge 5mm membelah panjang untuk sambatan pada konektor atau paket kecil kebutuhan Di atas lutut clamp atau serat pemegang operasi On-board pelatihan dan dukungan video Internet upgrade perangkat lunak… selengkapnya
Rp 22.000.000
Specifications Category Description Fiber alignment Fixed V-Groove(Clad to Clad) Applicable type of fibers SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU-T G.653), NZDS(ITU-T G.655) Fiber count Single fiber, 2~12 fiber Applicable fiber dimensions Single: Cladding diameter 125μm, Coating diameter 250, 900μm Ribbon: Cladding diameter 125μm, Ribbon fiber thickness 0.25 to 0.40mm Fiber setting and cleaved length 0.40in Splicing… selengkapnya
*Harga Hubungi CS
3%
OTDR VeEX MTT Plus 410 Optical Time Domain Reflectometer Wavelenght 1310,1550,Dinamyc Range 36 dB Modular, untuk aplikasi OTDR atau Ethernet Tester. Product Description : Clubbed with the support of an efficient staff of professionals being working at our premises, we are engaged in catering with a reliable assortment of Veex Mtt plus-410 OTDR. Mtt plus-410… selengkapnya
Rp 45.000.000 Rp 46.500.000
5%
Specifications View 3 DIMENSION 143H X 130W X 155D mm (excluding rubber bumper) 152H X 147W X 175D mm (including rubber bumper) WEIGHT 1.95KG (without battery) / 2.31KG (with battery) DISPLAY Touch Screen / Button NUMBER OF FIBER Single SPLICING TIME 7sec 9sec HEATING TIME 30sec Typical heating time FIBER VIEW & MAGNIFICATION X Y… selengkapnya
Rp 39.500.000 Rp 41.500.000
Smart ARC Control Technology Automatic calibration ARC discharge, Different environment, the same stable loss. Super heater 12s heating time, Faster and more power saving. Real fiber core visualization technology Core-to-Core alignment system, Keep the ultra-low splicing loss. Fiber identification, AUTO splicing mode. High light screen Clearly visible under sunshine. Ultra narrow ceramic V-groove Precision machining process. Suitable for all kinds… selengkapnya
*Harga Hubungi CS
The Fusion Splicer Fujikura 70S is the world’s fastest and most robust core alignment fusion splicer. Incorporating the proven ruggedized features pioneered by Fujikura, the 70S has added automated and enhanced user control features to increase splicing efficiency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process,… selengkapnya
*Harga Hubungi CS
Ilsintech Swift F3 Fusion Splicer Features Fixed V-groove alignment. SM, MM, DS, NZDS fiber splicing. Splicing time 7 sec for fusion splicing, 20 sec for sleeves heating. Efficient two-heater system. USB, RCA interfaces. Resistance to shock, rain, dust. User comfort. Ilsintech Swift F3 Fusion Splicer Technical Specifications Splicing Alignment Fixed V-Groove (Clad to Clad) Applicable… selengkapnya
*Harga Hubungi CS
Belum ada komentar, buka diskusi dengan komentar Anda.